2013 Volkswagen Passat - HomeLink Universal Transmitter (5 pages)
Download HomeLink Universal Transmitter
Manual Description
Applicable only in the United States Canada, in this section you'll find information about, the HomeLink® Universal Transmitter in your vehicle can be used to open/close an automatic garage, door or gate, activate a house alarm, or control a lighting system or other devices.
Usually come with a hand-held remote control that sends a signal to a controller operate device, these instructions will help you program the HomeLink® Universal Transmitter in your vehicle so that, you will not have to use the hand-held remote control that was supplied with garage door opener, or other device, inside your vehicle.
The garage door opener or other device may work with either a fixed or rolling code, openers or other devices with rolling codes, the HomeLink® Universal Transmitter must be synchronized after programming device, volkswagen recommends that you consult an authorized Volkswagen dealer authorized, volkswagen Service Facility about compatible devices before you buy a garage door opener other.
Device that you want to control with HomeLink® Universal Transmitter, the HomeLink® Universal Transmitter can be programmed to the radio frequency codes most, safety switches are mandatory garage door openers, mm button cells and other lithium batteries will cause serious personal injury even.
Death within a short time swallowed, always keep hand-held remote control devices with batteries, spare batteries, well, dead button cell and larger 20 mm batteries out of reach children, get medical attention immediately if you suspect that a battery has been swallowed.
Improper use of the HomeLink® Universal Transmitter can cause serious or even fatal personal injury, garage doors operate with enough force to cause serious personal injury, never let anyone get in the way of a garage door when it opening closing, when programming the HomeLink® Universal Transmitter, you may be operating garage.
Prevent serious personal injury property damage, when operating the training” button on a garage door opener with a rolling code, you will, need to stand on a ladder or step-stool, never use the HomeLink® Universal Transmitter with any garage door opener that does.
Not have the safety stop-and-reverse feature, as required by federal safety standards, includes any garage door opener model manufactured before April 1, 1982, a garage door opener that cannot detect an object, signaling the door stop reverse, does not meet current federal safety standards.
Features increases the risk of serious injury death, follow the installation manual and the included safety information manufacturer, when using the remote-controlled garage door opener electrical drive, Please first read and note the introductory information heed WARNINGS.
Please read the product manufacturer's instructions before programming garage door opener, Safely park the vehicle within range of the device be programmed, Switch the ignition on, but do not start engine, example, a gate and garage door, house alarm lighting system).
Please carry out each step only order specified, for first time programming only: Press and hold the two outer HomeLink buttons 1, at the same time for about 20 seconds, releasing only when HomeLink indicator light, this step deletes any old settings.
Position the hand-held transmitter for your remote control device 1-3 inches (25-75 mm), away from the HomeLink keypad on the driver side sun visor, keeping the HomeLink indicator light in view, shown ⇒ fig, using both hands, simultaneously press and hold both the HomeLink button you want, release the buttons until the HomeLink indicator light flashes slowly and then rapidly.
Press and hold the programmed HomeLink button and watch indicator light, if the indicator light comes on and does not flash, programming complete your, garage door opener or other device should activate when the HomeLink button pressed, if the indicator light blinks rapidly for 2 seconds and then stays on, proceed with the following programming instructions for a rolling code device.
Your vehicle to perform next steps ⇒ , at the garage door opener receiver (overhead unit) in the garage, locate learn”, is usually located near the hanging antenna wire attachment point on the unit.
Manual Description
Applicable only in the United States Canada, in this section you'll find information about, the HomeLink® Universal Transmitter in your vehicle can be used to open/close an automatic garage, door or gate, activate a house alarm, or control a lighting system or other devices.
Usually come with a hand-held remote control that sends a signal to a controller operate device, these instructions will help you program the HomeLink® Universal Transmitter in your vehicle so that, you will not have to use the hand-held remote control that was supplied with garage door opener, or other device, inside your vehicle.
The garage door opener or other device may work with either a fixed or rolling code, openers or other devices with rolling codes, the HomeLink® Universal Transmitter must be synchronized after programming device, volkswagen recommends that you consult an authorized Volkswagen dealer authorized, volkswagen Service Facility about compatible devices before you buy a garage door opener other.
Device that you want to control with HomeLink® Universal Transmitter, the HomeLink® Universal Transmitter can be programmed to the radio frequency codes most, safety switches are mandatory garage door openers, mm button cells and other lithium batteries will cause serious personal injury even.
Death within a short time swallowed, always keep hand-held remote control devices with batteries, spare batteries, well, dead button cell and larger 20 mm batteries out of reach children, get medical attention immediately if you suspect that a battery has been swallowed.
Improper use of the HomeLink® Universal Transmitter can cause serious or even fatal personal injury, garage doors operate with enough force to cause serious personal injury, never let anyone get in the way of a garage door when it opening closing, when programming the HomeLink® Universal Transmitter, you may be operating garage.
Prevent serious personal injury property damage, when operating the training” button on a garage door opener with a rolling code, you will, need to stand on a ladder or step-stool, never use the HomeLink® Universal Transmitter with any garage door opener that does.
Not have the safety stop-and-reverse feature, as required by federal safety standards, includes any garage door opener model manufactured before April 1, 1982, a garage door opener that cannot detect an object, signaling the door stop reverse, does not meet current federal safety standards.
Features increases the risk of serious injury death, follow the installation manual and the included safety information manufacturer, when using the remote-controlled garage door opener electrical drive, Please first read and note the introductory information heed WARNINGS.
Please read the product manufacturer's instructions before programming garage door opener, Safely park the vehicle within range of the device be programmed, Switch the ignition on, but do not start engine, example, a gate and garage door, house alarm lighting system).
Please carry out each step only order specified, for first time programming only: Press and hold the two outer HomeLink buttons 1, at the same time for about 20 seconds, releasing only when HomeLink indicator light, this step deletes any old settings.
Position the hand-held transmitter for your remote control device 1-3 inches (25-75 mm), away from the HomeLink keypad on the driver side sun visor, keeping the HomeLink indicator light in view, shown ⇒ fig, using both hands, simultaneously press and hold both the HomeLink button you want, release the buttons until the HomeLink indicator light flashes slowly and then rapidly.
Press and hold the programmed HomeLink button and watch indicator light, if the indicator light comes on and does not flash, programming complete your, garage door opener or other device should activate when the HomeLink button pressed, if the indicator light blinks rapidly for 2 seconds and then stays on, proceed with the following programming instructions for a rolling code device.
Your vehicle to perform next steps ⇒ , at the garage door opener receiver (overhead unit) in the garage, locate learn”, is usually located near the hanging antenna wire attachment point on the unit.
Volkswagen Models