Download Air Conditioning System (Hatchback)
Manual DescriptionTurn the knob to adjust fan speed—to, the right to increase, to left decrease, turning the air flow selector, windshield position turns on the defogging function with the purpose of clearing front view.
Turn the knob adjust temperature—, to the right to warm, to left cool, use with the air intake selector positioned FRESH, press the A/C” button dehumidified.
Turn the knob to select vents used, for details about air flow selector settings, see Air flow selector settings” described, vents and instrument panel vents.
From the floor vents windshield, turn the knob to select air source, d To cool off your Toyota after it has, been parked in the hot sun, drive with.
The windows open few minutes, this vents the hot air, allowing air, conditioning to cool interior more, d Make sure the air intake grilles front.
D On humid days, do not blow cold air, d Keep the area under front seats, clear to allow air to circulate throughout vehicle, d On cold days, set fan speed.
High” for a minute help clear, intake ducts of snow moisture, can reduce the amount fogging, d When driving on dusty roads, close all.
Closing the windows, it recommended, that the air intake selector be set, fRESH and the fan speed selector, d If following another vehicle dusty.
Road, or driving windy dusty, air intake selector be temporarily set, rECIRCULATE, which will close off, air and dust entering vehicle.
For best results, set controls to, d For quick heating, select recirculated, windows from fogging, select fresh after the vehicle interior has been, d Press the A/C” button dehumidified heating.
D Choose floor/windshield air flow heat, the vehicle interior while defrosting, d For quick cooling, turn temperature, selector knob fully towards COLD.
Change the air intake selector mode, turning the air flow selector windshield, with the purpose clearing front, on the windshield—the difference between the outside and inside temperatures could make fogging worse.
D To heat the vehicle interior while defrosting, if air flow control not satisfactory, check, panel vents may be opened closed, you can change air flow direction by turning instrument panel vents.
Label is placed inside glove box, as shown and indicates that filter has, the air conditioning filter behind.