2000 Toyota Tundra - Ignition Switch, Transmission and Parking Brake (16 pages)
Download Ignition Switch, Transmission and Parking Brake
Manual Description
You must push in the key turn key, from ACC” to LOCK” position, the selector lever must be in the P” position before pushing key, when starting the engine, key may.
Seem stuck at LOCK” position, free it, first be sure the key pushed all, wheel slightly while turning key gently, d Ignition switch with steering lock.
Will return to ON” position when, for starting tips, see Part 3, never remove the key when the vehicle is moving, as will lock, steering wheel and result loss.
This is normal driving position, door, a buzzer will remind you remove, position if the engine not running, for selecting either three- speed.
Braking than that 2” position, shift while pulling selector lever, must be in ON” ACC” position, vehicles with cruise control—When the cruise control is being used, even if you downshift the transmission by turning off overdrive.
Switch, engine braking will not be applied because the cruise control is not cancelled, your automatic transmission has shift, lock system to minimize possibility, only shift out of P” position when.
Brake pedal is depressed (with ignition, switch in ON” or ACC” position, to start the engine” Part 3, transmission must be P” N”.
Pedal, shift the selector lever D”, when the lever is D” position, the most suitable gear for running conditions such as normal cruising, hill climbing, hard towing, etc, always turn the overdrive switch.
Better fuel economy quieter driving, the engine coolant temperature low, transmission will not shift into the overdrive gear even with overdrive switch, to use engine braking, you can downshift.
D Turn off the overdrive switch, oFF” indicator light will come, d Shift into the 2” position, gear when vehicle speed drops.
Down to or lower than following, speed, and more powerful engine braking will be obtained, front drive control lever H2”, front drive control lever L4”.
D Shift into the L” position, when the vehicle speed drops down, or lower than following speed, maximum engine braking will be applied.
Never put your foot on the accelerator pedal while shifting, cruise control is being used, even you, downshift the transmission by turning off, the overdrive switch, engine braking will.
Not be applied because cruise control, the vehicle speed, see Cruise control”, could cause the vehicle spin.
Manual Description
You must push in the key turn key, from ACC” to LOCK” position, the selector lever must be in the P” position before pushing key, when starting the engine, key may.
Seem stuck at LOCK” position, free it, first be sure the key pushed all, wheel slightly while turning key gently, d Ignition switch with steering lock.
Will return to ON” position when, for starting tips, see Part 3, never remove the key when the vehicle is moving, as will lock, steering wheel and result loss.
This is normal driving position, door, a buzzer will remind you remove, position if the engine not running, for selecting either three- speed.
Braking than that 2” position, shift while pulling selector lever, must be in ON” ACC” position, vehicles with cruise control—When the cruise control is being used, even if you downshift the transmission by turning off overdrive.
Switch, engine braking will not be applied because the cruise control is not cancelled, your automatic transmission has shift, lock system to minimize possibility, only shift out of P” position when.
Brake pedal is depressed (with ignition, switch in ON” or ACC” position, to start the engine” Part 3, transmission must be P” N”.
Pedal, shift the selector lever D”, when the lever is D” position, the most suitable gear for running conditions such as normal cruising, hill climbing, hard towing, etc, always turn the overdrive switch.
Better fuel economy quieter driving, the engine coolant temperature low, transmission will not shift into the overdrive gear even with overdrive switch, to use engine braking, you can downshift.
D Turn off the overdrive switch, oFF” indicator light will come, d Shift into the 2” position, gear when vehicle speed drops.
Down to or lower than following, speed, and more powerful engine braking will be obtained, front drive control lever H2”, front drive control lever L4”.
D Shift into the L” position, when the vehicle speed drops down, or lower than following speed, maximum engine braking will be applied.
Never put your foot on the accelerator pedal while shifting, cruise control is being used, even you, downshift the transmission by turning off, the overdrive switch, engine braking will.
Not be applied because cruise control, the vehicle speed, see Cruise control”, could cause the vehicle spin.
Toyota Models