2014 Toyota Prius C - Operating the lights and wipers (13 pages)

Model: 2014 Toyota Prius C
File size: 0.78 MB
Pages: 13 pages



Download Operating the lights and wipers

Manual Description
The headlights can be operated manually, plate, daytime running lights and instrument panel lights turn, (except daytime running lights) turn on, turning on high beam headlights.

Pull the lever toward you, you can flash high beams, ● To make your vehicle more visible to other drivers, headlights turn, automatically (at a reduced intensity) whenever hybrid system.

Started and the parking brake is released, for type A: Daytime running lights can be turned off by operating, ● Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help.

Vehicles without smart key system, a buzzer sounds when the engine switch is turned to LOCK” ACC”, position and the driver's door is opened while the lights turned on, vehicles with smart key system.

A buzzer sounds when the POWER” switch is turned off turned, aCCESSORY mode and the driver's door is opened while lights, in the following conditions, the remaining lights will go off automatically after, minutes in order to prevent the vehicle battery being discharged.

● The headlights and/or tail lights on, ● The engine switch is turned to the ACC” LOCK” position (vehicles, without a smart key system) or the POWER” switch is turned to ACCESSORY mode or turned off (vehicles with smart key system), this function will be canceled in any following situations.

● When the engine switch is turned to the ON” position (vehicles without, smart key system) or the POWER” switch is turned to ON mode (vehicles with smart key system), ● When the light switch operated, ● When the door opened closed.

Customization that can be configured Toyota dealer, setting of the daytime running light system can be changed, to prevent 12-volt battery discharge, do not leave the lights on longer than necessary when hybrid system.

The fog lights secure excellent visibility in difficult driving conditions, such as rain fog, the wiper operation is selected by moving lever follows, *: The interval adjuster may not, operate a couple times after.

The windshield wipers and washer can be operated when, the engine switch is ON” position, the POWER” switch ON mode, if no windshield washer fluid sprays.

Check that the washer nozzles are not blocked if there is washer fluid, caution regarding the use washer fluid, when it is cold, do not use the washer fluid until windshield becomes, may lead to an accident, resulting in death serious injury.

When the washer fluid tank empty, do not operate the switch continually as the washer fluid pump may overheat, in this case, contact your Toyota dealer, the rear window wiper and washer can be operated when.

If no washer fluid sprays, check that the washer nozzle is not blocked if there is washer fluid, when the rear window dry...