2011 Toyota Prius - Operating the lights and windshield wipers (8 pages)
Download Operating the lights and windshield wipers
Manual Description
The headlights can be operated manually automatically, (except daytime running lights*) turn on, the side marker, parking, tail, license plate, turning on high beam headlights.
Pull the lever back center, position to turn high beams, pull the lever toward you, release the lever turn them off.
You can flash high beams, n Daytime running light system (Canada only), l To make your vehicle more visible to other drivers, headlights turn, automatically (at a reduced intensity) whenever hybrid system.
Started and the parking brake is released, l Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help, n Headlight control sensor (Canada only).
The sensor may not function properly, an object is placed on the sensor, or anything that blocks the sensor affixed, doing so interferes with sensor, detecting the level ambient light.
May cause the automatic headlight control system malfunction, l When the headlights are on: The headlights and tail lights turn off 30 seconds after a door is opened and closed if the POWER” switch has been, switched to ACCESSORY mode OFF, l When only the tail lights are on: The tail lights turn off automatically.
POWER” switch is switched to ACCESSORY mode OFF driver's, to turn the lights on again, turn the POWER” switch to ON mode, turn, light switch off once and then back, the level of the headlights is automatically adjusted according number.
Of passengers and the loading condition of the vehicle ensure that, headlights do not interfere with other road users, indicator flashes (vehicles with LED headlights), it may indicate a malfunction in the system.
N Customization that can be configured Toyota dealer, n To prevent 12 volt battery discharge, do not leave the lights on longer than necessary if the hybrid system not, n Automatic headlight leveling system (vehicles with LED headlights).
The fog lights improve visibility in difficult driving conditions, such, wiper intervals can be adjusted intermittent operation (when, n The windshield wipers and washer can be operated when, the POWER” switch ON mode.
N If no windshield washer fluid sprays, check that the washer nozzles are not blocked if there is washer fluid, n When there is no washer fluid spray nozzle, damage to the washer fluid pump may be caused if lever pulled.
N The rear window wiper and washer can be operated when, n When the rear window dry, washer fluid can be sprayed headlights, n The headlight cleaner can be operated when.
The POWER” switch is in ON mode and the headlight switch turned on, if equipped, the headlight switch is in the AUTO” position headlight, when the windshield washer is operated with the POWER” switch ON, mode and the low beam headlights on, the headlight cleaner will operate.
N When the washer fluid tank empty, do not use this function when the washer fluid tank empty, cause the washer fluid pump overheat...
Manual Description
The headlights can be operated manually automatically, (except daytime running lights*) turn on, the side marker, parking, tail, license plate, turning on high beam headlights.
Pull the lever back center, position to turn high beams, pull the lever toward you, release the lever turn them off.
You can flash high beams, n Daytime running light system (Canada only), l To make your vehicle more visible to other drivers, headlights turn, automatically (at a reduced intensity) whenever hybrid system.
Started and the parking brake is released, l Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help, n Headlight control sensor (Canada only).
The sensor may not function properly, an object is placed on the sensor, or anything that blocks the sensor affixed, doing so interferes with sensor, detecting the level ambient light.
May cause the automatic headlight control system malfunction, l When the headlights are on: The headlights and tail lights turn off 30 seconds after a door is opened and closed if the POWER” switch has been, switched to ACCESSORY mode OFF, l When only the tail lights are on: The tail lights turn off automatically.
POWER” switch is switched to ACCESSORY mode OFF driver's, to turn the lights on again, turn the POWER” switch to ON mode, turn, light switch off once and then back, the level of the headlights is automatically adjusted according number.
Of passengers and the loading condition of the vehicle ensure that, headlights do not interfere with other road users, indicator flashes (vehicles with LED headlights), it may indicate a malfunction in the system.
N Customization that can be configured Toyota dealer, n To prevent 12 volt battery discharge, do not leave the lights on longer than necessary if the hybrid system not, n Automatic headlight leveling system (vehicles with LED headlights).
The fog lights improve visibility in difficult driving conditions, such, wiper intervals can be adjusted intermittent operation (when, n The windshield wipers and washer can be operated when, the POWER” switch ON mode.
N If no windshield washer fluid sprays, check that the washer nozzles are not blocked if there is washer fluid, n When there is no washer fluid spray nozzle, damage to the washer fluid pump may be caused if lever pulled.
N The rear window wiper and washer can be operated when, n When the rear window dry, washer fluid can be sprayed headlights, n The headlight cleaner can be operated when.
The POWER” switch is in ON mode and the headlight switch turned on, if equipped, the headlight switch is in the AUTO” position headlight, when the windshield washer is operated with the POWER” switch ON, mode and the low beam headlights on, the headlight cleaner will operate.
N When the washer fluid tank empty, do not use this function when the washer fluid tank empty, cause the washer fluid pump overheat...
Toyota Models