1998 Toyota Land Cruiser - Gauges, Meters and Service Reminder Indicators (10 pages)
Download Gauges, Meters and Service Reminder Indicators
Manual Description
If the fuel tank completely empty, the indicator lamp goes off after driving, not go off, contact your Toyota dealer, the gauge works when ignition.
Switch is on and indicates the approximate quantity of fuel remaining, it is a good idea to keep tank over, d Odometer two trip meters, the needle moves when braking, accelerating or making turns.
The movement of the fuel tank, if the fuel level approaches ”E” low, fuel level warning light comes on, fill, the thermostat is designed to control the flow of coolant keep.
Z Do not continue driving with an, the gauge indicates engine coolant, will vary with changes weather, if the needle points to red zone.
Higher, stop your vehicle allow, your vehicle may overheat during severe, d Driving up a long hill hot day, d Reducing speed stopping after high.
D Idling for a long period with air, conditioning on in stop- and- go traffic, the oil pressure gauge indicates engine, oil pressure when ignition switch.
That the needle is proper range, if the oil pressure should stay below, normal range, pull off the road safe, place and stop engine immediately.
Call a Toyota dealer qualified repair, oil pressure may not build up when, gauge is not designed indicate oil level, and the oil level must be checked using.
The voltmeter tells whether battery, while the engine running–the needle, should always indicate shown above, in thousands rpm (revolutions per.
Correct shift points and to prevent engine lugging overrevving, do not drive the vehicle with oil, pressure below normal range until, the cause is fixed–it may ruin engine.
If the needle reads below above, normal range while engine running, it indicates the charging system needs immediate repair, however, it is normal needle.
Drop below the normal range during engine starting, driving with the engine running too fast, causes excessive engine wear poor, the slower the engine speed, greater.
To change meter display, quickly, odometer to trip meter A trip meter, b, then back odometer each, to reset the trip meter A to zero, display the meter A reading, then push.
And hold the knob until meter, applied for resetting trip meter B, since the last time each trip meter was.
Manual Description
If the fuel tank completely empty, the indicator lamp goes off after driving, not go off, contact your Toyota dealer, the gauge works when ignition.
Switch is on and indicates the approximate quantity of fuel remaining, it is a good idea to keep tank over, d Odometer two trip meters, the needle moves when braking, accelerating or making turns.
The movement of the fuel tank, if the fuel level approaches ”E” low, fuel level warning light comes on, fill, the thermostat is designed to control the flow of coolant keep.
Z Do not continue driving with an, the gauge indicates engine coolant, will vary with changes weather, if the needle points to red zone.
Higher, stop your vehicle allow, your vehicle may overheat during severe, d Driving up a long hill hot day, d Reducing speed stopping after high.
D Idling for a long period with air, conditioning on in stop- and- go traffic, the oil pressure gauge indicates engine, oil pressure when ignition switch.
That the needle is proper range, if the oil pressure should stay below, normal range, pull off the road safe, place and stop engine immediately.
Call a Toyota dealer qualified repair, oil pressure may not build up when, gauge is not designed indicate oil level, and the oil level must be checked using.
The voltmeter tells whether battery, while the engine running–the needle, should always indicate shown above, in thousands rpm (revolutions per.
Correct shift points and to prevent engine lugging overrevving, do not drive the vehicle with oil, pressure below normal range until, the cause is fixed–it may ruin engine.
If the needle reads below above, normal range while engine running, it indicates the charging system needs immediate repair, however, it is normal needle.
Drop below the normal range during engine starting, driving with the engine running too fast, causes excessive engine wear poor, the slower the engine speed, greater.
To change meter display, quickly, odometer to trip meter A trip meter, b, then back odometer each, to reset the trip meter A to zero, display the meter A reading, then push.
And hold the knob until meter, applied for resetting trip meter B, since the last time each trip meter was.
Toyota Models