2015 Toyota Corolla - Automatic transmission* (23 pages)

Model: 2015 Toyota Corolla
File size: 0.56 MB
Pages: 23 pages



Download Automatic transmission*

Manual Description
Engine (ignition) switch (vehicles without, automatic transmission continuously variable transmission, check that the parking brake set, check that the shift lever set P.

Turn the engine switch to the START” position start, check that the shift lever set N, when the shift lever P, as the audio system can be used.

All electrical components can be used, turning the key ACC” LOCK”, shift the shift lever to P (automatic transmission continuously variable, if the engine does not start.

The engine immobilizer system may not have been deactivated, when the steering lock cannot be released, switch may seem stuck LOCK”, a buzzer sounds if the driver's door is opened while the engine switch.

The LOCK” or ACC” position to remind you remove key, always start the engine while sitting in the driver's seat, accelerator pedal while starting the engine under any circumstances, doing so may cause an accident resulting in death serious injury.

Do not turn the engine switch to the LOCK” position while driving, emergency, you must turn the engine off while the vehicle moving, turn, the engine switch only to the ACC” position to stop engine, may result if the engine is stopped while driving.

Do not leave the engine switch in the ACC” or ON” position for long periods of time without engine running, overheat the starter wiring system, ● If the engine becomes difficult to start or stalls frequently, have your vehicle checked by your Toyota dealer immediately, engine (ignition) switch (vehicles with.

Performing the following operations when carrying the electronic key on your person starts the engine changes engine, vehicles with drive monitor display, continuously variable transmission: Check that the shift lever set, manual transmission: Check that the shift lever is set N.

The smart key system indicator light (green) will turn on, light does not turn on, the engine cannot be started, the engine will crank until it starts, pedal (continuously variable transmission) clutch pedal (manual.

The engine can be started, will be displayed multi-information display, continuously variable transmission: Shift the shift lever P, manual transmission: Shift the shift lever N.

Vehicles with a drive monitor display: Release brake pedal, (continuously variable transmission) or clutch pedal (manual transmission) and check that the smart key system indicator light (green), vehicles with a multi-information display: Release brake pedal, (continuously variable transmission) or clutch pedal (manual transmission) and check that POWER ON” on the multi-information display off.

Modes can be changed by pressing the engine switch with brake, such as audio system can, the smart key system indicator light (green) flashes slowly, *: Vehicles with a continuously variable transmission: If the shift lever.

A position other than P when turning off the engine, engine switch, will be turned to ACCESSORY mode, not off, pOWER ON” will be displayed multi-information display, when stopping the engine with the shift lever position other.

Than P (vehicles with continuously variable transmission), if the engine is stopped with the shift lever in a position other than P, the engine switch will not be turned off but instead be turned.





Toyota Models