2010 Toyota Corolla - Operating the lights and wipers (5 pages)
Download Operating the lights and wipers
Manual Description
Plate, daytime running lights and instrument panel lights turn, (except daytime running lights) turn on, turning on high beam headlights, pull the lever back center.
Position to turn high beams, pull the lever toward you, release the lever turn them off, you can flash high beams.
● To make your vehicle more visible to other drivers, headlights turn, automatically whenever the engine is started and parking brake, the brightness of headlights will automatically change depending, panel lights automatically turn off.
● Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help, the sensor may not function properly, an object is placed on the sensor, or anything that blocks the sensor affixed.
Doing so interferes with sensor, detecting the level ambient light, may cause the daytime running light system malfunction, a buzzer sounds when the engine switch is turned OFF driver's door.
Is opened with the key removed from the engine switch while lights, a buzzer sounds when the ENGINE START STOP” switch turned OFF, to ACCESSORY mode and the driver's door is opened while lights, do not leave the lights on longer than necessary when the engine not running.
Daytime running light control sensor, the fog lights improve visibility in difficult driving conditions, such, wiper intervals can be adjusted intermittent operation, *: The interval adjuster may not.
The windshield wipers and washers can be operated when, the ENGINE START STOP” switch is IGNITION ON mode, the engine switch is ON” position, if no windshield washer fluid sprays.
Check that the washer nozzles are not blocked and if there washer fluid, when there is no washer fluid spray nozzle, damage to the washer fluid pump may be caused if lever pulled, in this case, contact your Toyota dealer immediately.
Manual Description
Plate, daytime running lights and instrument panel lights turn, (except daytime running lights) turn on, turning on high beam headlights, pull the lever back center.
Position to turn high beams, pull the lever toward you, release the lever turn them off, you can flash high beams.
● To make your vehicle more visible to other drivers, headlights turn, automatically whenever the engine is started and parking brake, the brightness of headlights will automatically change depending, panel lights automatically turn off.
● Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help, the sensor may not function properly, an object is placed on the sensor, or anything that blocks the sensor affixed.
Doing so interferes with sensor, detecting the level ambient light, may cause the daytime running light system malfunction, a buzzer sounds when the engine switch is turned OFF driver's door.
Is opened with the key removed from the engine switch while lights, a buzzer sounds when the ENGINE START STOP” switch turned OFF, to ACCESSORY mode and the driver's door is opened while lights, do not leave the lights on longer than necessary when the engine not running.
Daytime running light control sensor, the fog lights improve visibility in difficult driving conditions, such, wiper intervals can be adjusted intermittent operation, *: The interval adjuster may not.
The windshield wipers and washers can be operated when, the ENGINE START STOP” switch is IGNITION ON mode, the engine switch is ON” position, if no windshield washer fluid sprays.
Check that the washer nozzles are not blocked and if there washer fluid, when there is no washer fluid spray nozzle, damage to the washer fluid pump may be caused if lever pulled, in this case, contact your Toyota dealer immediately.
Toyota Models