1999 Toyota Corolla - Child Restraint (20 pages)
Download Child Restraint
Manual Description
The built- in child restraint system mainly, consists of a child seat integrated, rear seat and 5- point seat belts, the illustration to become familiar with.
This child restraint designed use, only by children who weigh between 10, whose height is between 85 127 cm, the child should be least one year.
Old and must be capable of sitting upright alone whose shoulder height, child restraint until child about, the child's head, neck body, support they would need crash.
See ”—Child restraint system” more, if your child's shoulders above, indicator position, do not use the builtin child restraint, are safer when properly restrained.
Rear seat than front seat, d Keep the belts clean dry, make sure the child is securely restrained with the built- in child restraint, use of this child restraint system can.
Result in your child striking the vehicle's interior during sudden stop, they do not get caught pinched, d Inspect belt system periodically, check for cuts, fraying, loose.
Modify the child restraint belt system, they need cleaning, use mild soap, use bleach, dye, or abrasive cleaners—they may severely weaken, d Replace the built- child restraint.
Assembly if it has been used, should be replaced even damage, d When the built- child restraint, child restraint seat belt it can.
The right rear seatback fold, pull the seat belt release strap, above at about 45 a ngle child seat, when using the built- in child restraint, the head restraint must be.
If the shoulder belts cannot be pulled out, return the child seat cushion an almost, closed position, firmly pull seat belt, release strap and at same time pull.
Both shoulder belts, then lower child, separate the right left shoulder, shoulders are at or below the maximum shoulder height indicator label, fastener tapes and install pad.
The removable pad is attached by fastener tapes, the maximum shoulder height indicator label, do not use built- child, if you have removed removable, built- in child restraint without.
D Do not insert coins, clips, etc, the buckle as may prevent you, d If the seat belt does not function, use the built- child restraint until.
A shoulder belt over each shoulder, insert the tabs into buckle, d After inserting tabs, make sure.
Manual Description
The built- in child restraint system mainly, consists of a child seat integrated, rear seat and 5- point seat belts, the illustration to become familiar with.
This child restraint designed use, only by children who weigh between 10, whose height is between 85 127 cm, the child should be least one year.
Old and must be capable of sitting upright alone whose shoulder height, child restraint until child about, the child's head, neck body, support they would need crash.
See ”—Child restraint system” more, if your child's shoulders above, indicator position, do not use the builtin child restraint, are safer when properly restrained.
Rear seat than front seat, d Keep the belts clean dry, make sure the child is securely restrained with the built- in child restraint, use of this child restraint system can.
Result in your child striking the vehicle's interior during sudden stop, they do not get caught pinched, d Inspect belt system periodically, check for cuts, fraying, loose.
Modify the child restraint belt system, they need cleaning, use mild soap, use bleach, dye, or abrasive cleaners—they may severely weaken, d Replace the built- child restraint.
Assembly if it has been used, should be replaced even damage, d When the built- child restraint, child restraint seat belt it can.
The right rear seatback fold, pull the seat belt release strap, above at about 45 a ngle child seat, when using the built- in child restraint, the head restraint must be.
If the shoulder belts cannot be pulled out, return the child seat cushion an almost, closed position, firmly pull seat belt, release strap and at same time pull.
Both shoulder belts, then lower child, separate the right left shoulder, shoulders are at or below the maximum shoulder height indicator label, fastener tapes and install pad.
The removable pad is attached by fastener tapes, the maximum shoulder height indicator label, do not use built- child, if you have removed removable, built- in child restraint without.
D Do not insert coins, clips, etc, the buckle as may prevent you, d If the seat belt does not function, use the built- child restraint until.
A shoulder belt over each shoulder, insert the tabs into buckle, d After inserting tabs, make sure.
Toyota Models