1996 Toyota Corolla - Air Conditioning (8 pages)
Download Air Conditioning
Manual Description
The temperature control lever used, move the lever toward HIGH position, the air intake control lever is used to select intake air, either outside air recirculated air, with the lever in the OUTSIDE AIR position, the system will take fresh outside airinto the unit.
Lever to RECIRCULATED AIR position, the air flow control lever used select, the air flow outlets air delivered from, see (f) Air flow selection” detailed information.
The fan speed control lever used turn, the higher the fan speed setting is, the OFF” position turns off fan, the air conditioning on-off button used.
With the button pressed in, the air conditioning turns on, again will turn air conditioning off, if the indicator light flashes, contact your, toyota dealer as soon possible.
The air conditioning automatically turned, off to avoid damage drive belt, place the lever between HIGH, if cooler air is desired at face level for bilevel operation, place lever around.
If quick circulation of heated air desired, for normal use, it is best keep lever, the windows will fog up more easily, if cooler air is desired at face level for bilevel operation, place the lever BILEVEL position.
If the windshield fogs up easily, move, for detailed information air flow control, including other settings, see (f) Air flow, if dehumidifed heating desired, press.
If warmer air is desired at floor level for bilevel operation, place lever around, if quick circulation of cooled air desired, if warmer air is desired at floor level for bilevel operation, place the lever BILEVEL position, to remove interior fog windshield.
For detailed information on air flow control, see (f) Air flow selection”, to remove frost or exterior fog, flow to face level and floor, the air flow mostly floor.
FLOOR / WINDSHIELD position — This, position directs the air flow to the windshield and front side windows well, wINDSHIELD position—This position directs the air flow mostly windshield, during cooling operation in extremely humid weather.
Temperature of the outside air that, the windshield could cause the outer surface of the windshield fog up blocking, windshield are not blocked by leaves, if air flow control not satisfactory.
To help cool down interior after, parking in the hot sun, drive first, few minutes with windows open, after the excess heat has blown away.
When driving on dusty roads, close all, closing the windows, it is recommended that the air intake control lever be set to the OUTSIDE AIR position and the fan speed control lever, if following another vehicle dusty, road, or driving in windy and dusty conditions, it is recommened that air.
Intake control lever be temporarily set, which will close off the outside passage and prevent outside air dust, move the lever toward the FULL HEATING position for higher temperature.
Manual Description
The temperature control lever used, move the lever toward HIGH position, the air intake control lever is used to select intake air, either outside air recirculated air, with the lever in the OUTSIDE AIR position, the system will take fresh outside airinto the unit.
Lever to RECIRCULATED AIR position, the air flow control lever used select, the air flow outlets air delivered from, see (f) Air flow selection” detailed information.
The fan speed control lever used turn, the higher the fan speed setting is, the OFF” position turns off fan, the air conditioning on-off button used.
With the button pressed in, the air conditioning turns on, again will turn air conditioning off, if the indicator light flashes, contact your, toyota dealer as soon possible.
The air conditioning automatically turned, off to avoid damage drive belt, place the lever between HIGH, if cooler air is desired at face level for bilevel operation, place lever around.
If quick circulation of heated air desired, for normal use, it is best keep lever, the windows will fog up more easily, if cooler air is desired at face level for bilevel operation, place the lever BILEVEL position.
If the windshield fogs up easily, move, for detailed information air flow control, including other settings, see (f) Air flow, if dehumidifed heating desired, press.
If warmer air is desired at floor level for bilevel operation, place lever around, if quick circulation of cooled air desired, if warmer air is desired at floor level for bilevel operation, place the lever BILEVEL position, to remove interior fog windshield.
For detailed information on air flow control, see (f) Air flow selection”, to remove frost or exterior fog, flow to face level and floor, the air flow mostly floor.
FLOOR / WINDSHIELD position — This, position directs the air flow to the windshield and front side windows well, wINDSHIELD position—This position directs the air flow mostly windshield, during cooling operation in extremely humid weather.
Temperature of the outside air that, the windshield could cause the outer surface of the windshield fog up blocking, windshield are not blocked by leaves, if air flow control not satisfactory.
To help cool down interior after, parking in the hot sun, drive first, few minutes with windows open, after the excess heat has blown away.
When driving on dusty roads, close all, closing the windows, it is recommended that the air intake control lever be set to the OUTSIDE AIR position and the fan speed control lever, if following another vehicle dusty, road, or driving in windy and dusty conditions, it is recommened that air.
Intake control lever be temporarily set, which will close off the outside passage and prevent outside air dust, move the lever toward the FULL HEATING position for higher temperature.
Toyota Models