2011 Toyota Camry - Operating the lights and wipers (8 pages)
Download Operating the lights and wipers
Manual Description
The headlights can be operated manually automatically, the headlights, parking lights, daytime running lights so, the side marker, parking, tail, license plate, (except daytime running lights) turn on.
Turning on high beam headlights, pull the lever back center, position to turn high beams, pull the lever toward you.
Release the lever turn them off, you can flash high beams, the ENGINE START STOP” switch is IGNITION ON mode, the engine switch is ON” position.
● To make your vehicle more visible to other drivers, headlights turn, automatically (at a reduced intensity) whenever the engine started, ● Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help.
The sensor may not function properly, an object is placed on the sensor, or anything that blocks the sensor affixed, doing so interferes with sensor, detecting the level ambient light.
May cause the automatic headlight system malfunction, ● When the headlights are on: The headlights and tail lights turn off 30 seconds after all doors are closed with the ENGINE START STOP” switch, ● When only the tail lights are on: The tail lights turn off automatically, eNGINE START STOP” switch is turned OFF and driver's door.
To turn the lights on again, turn the ENGINE START STOP” switch to IGNITION ON mode, or turn the headlight switch off then back, ● When the headlights are on: The headlights and tail lights turn off 30 seconds after all doors are closed with the engine switch OFF, wireless remote control: The lights turn off immediately, key is pressed after all doors locked.
Engine switch is turned OFF and the driver's door opened, to turn the lights on again, turn the engine switch to ON” position, turn the headlight switch off then back, customization that can be configured Toyota dealer.
Do not leave the lights on longer than necessary when the engine not running, the fog lights improve visibility in difficult driving conditions, such, wiper intervals can be adjusted intermittent operation, the windshield wiper and washers can be operated when.
If no windshield washer fluid sprays, check that the washer nozzles are not blocked and if there washer fluid, when there is no washer fluid spray nozzle, damage to the washer fluid pump may be caused if lever pulled.
Manual Description
The headlights can be operated manually automatically, the headlights, parking lights, daytime running lights so, the side marker, parking, tail, license plate, (except daytime running lights) turn on.
Turning on high beam headlights, pull the lever back center, position to turn high beams, pull the lever toward you.
Release the lever turn them off, you can flash high beams, the ENGINE START STOP” switch is IGNITION ON mode, the engine switch is ON” position.
● To make your vehicle more visible to other drivers, headlights turn, automatically (at a reduced intensity) whenever the engine started, ● Compared to turning on the headlights, the daytime running light system, offers greater durability and consumes less electricity, so it can help.
The sensor may not function properly, an object is placed on the sensor, or anything that blocks the sensor affixed, doing so interferes with sensor, detecting the level ambient light.
May cause the automatic headlight system malfunction, ● When the headlights are on: The headlights and tail lights turn off 30 seconds after all doors are closed with the ENGINE START STOP” switch, ● When only the tail lights are on: The tail lights turn off automatically, eNGINE START STOP” switch is turned OFF and driver's door.
To turn the lights on again, turn the ENGINE START STOP” switch to IGNITION ON mode, or turn the headlight switch off then back, ● When the headlights are on: The headlights and tail lights turn off 30 seconds after all doors are closed with the engine switch OFF, wireless remote control: The lights turn off immediately, key is pressed after all doors locked.
Engine switch is turned OFF and the driver's door opened, to turn the lights on again, turn the engine switch to ON” position, turn the headlight switch off then back, customization that can be configured Toyota dealer.
Do not leave the lights on longer than necessary when the engine not running, the fog lights improve visibility in difficult driving conditions, such, wiper intervals can be adjusted intermittent operation, the windshield wiper and washers can be operated when.
If no windshield washer fluid sprays, check that the washer nozzles are not blocked and if there washer fluid, when there is no washer fluid spray nozzle, damage to the washer fluid pump may be caused if lever pulled.
Toyota Models