2003 Toyota Camry - Ignition Switch, Transmission and Parking Brake (20 pages)
Download Ignition Switch, Transmission and Parking Brake
Manual Description
Ignition switch, Transmission Parking brake, you must push in the key turn key, from ACC” to LOCK” position, the selector lever must be put P”.
Once you remove the key, the engine immobiliser system automatically set, engine immobiliser system” page 15, will return to ON” position when, for starting tips, see page 207 Section.
This is normal driving position, door, a buzzer will remind you remove, when starting the engine, key may, seem stuck at LOCK” position.
Free it, first be sure the key pushed all, wheel slightly while turning key gently, never remove the key when the vehicle is moving, as will lock, steering wheel and result loss.
Position if the engine not running, if the automatic unlocking operation linked, with the ignition switch set, all doors, are automatically unlocked when the ignition switch is turned from the ON” position to the ACC” LOCK” position.
Details, see —Automatic door locking, unlocking functions” on page 19 Section, your automatic transmission has shift, lock system to minimize possibility.
Only shift out of P” position when, brake pedal is depressed (with ignition, switch in ON” position and the lock release button depressed), the shift position is also displayed.
D: Normal driving (with overdrive on), cruise control is being used, even you, downshift the transmission by pushing, braking will not be enabled because.
Never put your foot on the accelerator pedal while shifting, for ways to decrease vehicle speed, see Cruise control” on page 129, you can select either third gear (with.
Overdrive off) or fourth gear (with overdrive on) by pushing switch, to turn the overdrive off, push switch, the O/D OFF” indicator light should come, always drive your vehicle with the overdrive on for better fuel economy.
If the engine is turned off when the overdrive is off restarted, overdrive, if the automatic locking operation linked, with the shift position is set, all doors, automatically locked when shift lever.
Ignition switch is in ON” position, functions” on page 19 Section 1−2, to start the engine” page 208, pedal, shift the selector lever D”.
When the lever is in D” position, the most suitable gear for running conditions such as normal cruising, hill climbing, hard towing, etc, always turn the overdrive better, transmission will not shift into overdrive.
Gear even with overdrive on, to use engine braking, you can downshift, oFF” indicator light will come.
Manual Description
Ignition switch, Transmission Parking brake, you must push in the key turn key, from ACC” to LOCK” position, the selector lever must be put P”.
Once you remove the key, the engine immobiliser system automatically set, engine immobiliser system” page 15, will return to ON” position when, for starting tips, see page 207 Section.
This is normal driving position, door, a buzzer will remind you remove, when starting the engine, key may, seem stuck at LOCK” position.
Free it, first be sure the key pushed all, wheel slightly while turning key gently, never remove the key when the vehicle is moving, as will lock, steering wheel and result loss.
Position if the engine not running, if the automatic unlocking operation linked, with the ignition switch set, all doors, are automatically unlocked when the ignition switch is turned from the ON” position to the ACC” LOCK” position.
Details, see —Automatic door locking, unlocking functions” on page 19 Section, your automatic transmission has shift, lock system to minimize possibility.
Only shift out of P” position when, brake pedal is depressed (with ignition, switch in ON” position and the lock release button depressed), the shift position is also displayed.
D: Normal driving (with overdrive on), cruise control is being used, even you, downshift the transmission by pushing, braking will not be enabled because.
Never put your foot on the accelerator pedal while shifting, for ways to decrease vehicle speed, see Cruise control” on page 129, you can select either third gear (with.
Overdrive off) or fourth gear (with overdrive on) by pushing switch, to turn the overdrive off, push switch, the O/D OFF” indicator light should come, always drive your vehicle with the overdrive on for better fuel economy.
If the engine is turned off when the overdrive is off restarted, overdrive, if the automatic locking operation linked, with the shift position is set, all doors, automatically locked when shift lever.
Ignition switch is in ON” position, functions” on page 19 Section 1−2, to start the engine” page 208, pedal, shift the selector lever D”.
When the lever is in D” position, the most suitable gear for running conditions such as normal cruising, hill climbing, hard towing, etc, always turn the overdrive better, transmission will not shift into overdrive.
Gear even with overdrive on, to use engine braking, you can downshift, oFF” indicator light will come.
Toyota Models