2015 Subaru Forester - Turn-Start Remote Start Quick Reference Guide (2 pages)
Download Turn-Start Remote Start Quick Reference Guide
Manual Description
NOTE: All vehicle doors, hood, trunk or rear gate must be closed prior to activating remote engine start, upon successful activation, the remote start fob will flash and beep once**, the horn sounds once side marker, lights, tail lights and parking lights flash once, if all conditions are met, the engine will start within five (5) seconds.
flash and beep twice**, the horn sounds once and the side marker lights, tail lights and parking lights flash once, while the engine is idling via the remote engine start system, the remote start fob will continue flash once every, three seconds, the side marker lights, tail lights and parking lights will remain illuminated power window, has a timer that will allow the system to operate for a maximum of twenty (20) minutes (under multiple remote start.
If the engine turns over but does not start (or starts and stalls) the remote engine start system will power off then, attempt the engine three (3) additional times, vehicle malfunction is preventing it from starting, remote engine start request will be aborted.
For safety and security reasons, the system will fail to start or shut down the engine during remote start operation, the remote start system has operated for twenty (20) minutes between ignition key cycles, the horn will honk three (3) times and the parking lights will flash three (3) times, the remote start system Service Mode” engaged.
The horn will honk five (5) times and the parking lights will flash five (5) times, any of the vehicle's doors, trunk or rear gate open / opened, the horn will honk six (6) times and the parking lights will flash six (6) times, the horn will honk two (2) times and the parking lights will flash two (2) times.
The ignition key is resting ignition cylinder, the transmission shifter is not park” position, the vehicle's brake pedal is depressed before the vehicle ignition switch turned on”, the vehicle's engine idle speed has reached a level over 3,500 RPM (this will cause vehicle shutdown).
The vehicle's security system is triggered by opening the door or rear gate (if the security system armed, in addition to the items above, if the vehicle's engine management system determines there is a safety risk due, vehicle related problem, the vehicle will shut down and the vehicle's horn will honk three (3) times, wARNING: TO AVOID DANGER OF CARBON MONOXIDE, NEVER REMOTE START A VEHICLE IN A CLOSED.
SPACE SUCH AS A CLOSED GARAGE, nOTE: Laws in some communities require that the vehicle be within view of anyone using Remote Engine, using the Remote Engine Starter, check your state, provincial local laws, * See your owner's manual more details.
** Provided that the remote start transmitter is within the operating range system, entering the Vehicle While it is Running via Remote Start, unlock the vehicle doors using the remote keyless entry system, using the key, the vehicle's security system will trigger (if the security system is armed prior activating.
Remote start system) and the vehicle's engine will turn off, turning it to the on” position or pressing the unlock button on the remote keyless entry transmitter will disarm, the engine will shut down upon opening any vehicle door, trunk, hatch or rear gate of 5-door / wagon vehicles, insert the key into the ignition and turn to the start position re-start engine.
Your remote start transmitter is equipped with a unique bidirectional confirmation feature, the transmitter's backlit button to display system status provided the vehicle and transmitter fall within system's, flash when button is pressed (no audible beep), indicates that the system is transmitting an RF signal.
Long flashes (no audible beep)following remote start activation, (transmitter button is pressed 2 times within 3 seconds), indicates that the transmitter did not receive remote start, activation confirmation from the vehicle system.
Will automatically send one additional remote start activation, flash & 1 beep following remote start activation (transmitter, button is pressed 2 times within 3 seconds), indicates that the transmitter has received remote start activation.
flash & 2 beeps following remote start activation (transmitter, indicates that the transmitter has received confirmation, successful start of the vehicle system (vehicle now running).
Manual Description
NOTE: All vehicle doors, hood, trunk or rear gate must be closed prior to activating remote engine start, upon successful activation, the remote start fob will flash and beep once**, the horn sounds once side marker, lights, tail lights and parking lights flash once, if all conditions are met, the engine will start within five (5) seconds.
flash and beep twice**, the horn sounds once and the side marker lights, tail lights and parking lights flash once, while the engine is idling via the remote engine start system, the remote start fob will continue flash once every, three seconds, the side marker lights, tail lights and parking lights will remain illuminated power window, has a timer that will allow the system to operate for a maximum of twenty (20) minutes (under multiple remote start.
If the engine turns over but does not start (or starts and stalls) the remote engine start system will power off then, attempt the engine three (3) additional times, vehicle malfunction is preventing it from starting, remote engine start request will be aborted.
For safety and security reasons, the system will fail to start or shut down the engine during remote start operation, the remote start system has operated for twenty (20) minutes between ignition key cycles, the horn will honk three (3) times and the parking lights will flash three (3) times, the remote start system Service Mode” engaged.
The horn will honk five (5) times and the parking lights will flash five (5) times, any of the vehicle's doors, trunk or rear gate open / opened, the horn will honk six (6) times and the parking lights will flash six (6) times, the horn will honk two (2) times and the parking lights will flash two (2) times.
The ignition key is resting ignition cylinder, the transmission shifter is not park” position, the vehicle's brake pedal is depressed before the vehicle ignition switch turned on”, the vehicle's engine idle speed has reached a level over 3,500 RPM (this will cause vehicle shutdown).
The vehicle's security system is triggered by opening the door or rear gate (if the security system armed, in addition to the items above, if the vehicle's engine management system determines there is a safety risk due, vehicle related problem, the vehicle will shut down and the vehicle's horn will honk three (3) times, wARNING: TO AVOID DANGER OF CARBON MONOXIDE, NEVER REMOTE START A VEHICLE IN A CLOSED.
SPACE SUCH AS A CLOSED GARAGE, nOTE: Laws in some communities require that the vehicle be within view of anyone using Remote Engine, using the Remote Engine Starter, check your state, provincial local laws, * See your owner's manual more details.
** Provided that the remote start transmitter is within the operating range system, entering the Vehicle While it is Running via Remote Start, unlock the vehicle doors using the remote keyless entry system, using the key, the vehicle's security system will trigger (if the security system is armed prior activating.
Remote start system) and the vehicle's engine will turn off, turning it to the on” position or pressing the unlock button on the remote keyless entry transmitter will disarm, the engine will shut down upon opening any vehicle door, trunk, hatch or rear gate of 5-door / wagon vehicles, insert the key into the ignition and turn to the start position re-start engine.
Your remote start transmitter is equipped with a unique bidirectional confirmation feature, the transmitter's backlit button to display system status provided the vehicle and transmitter fall within system's, flash when button is pressed (no audible beep), indicates that the system is transmitting an RF signal.
Long flashes (no audible beep)following remote start activation, (transmitter button is pressed 2 times within 3 seconds), indicates that the transmitter did not receive remote start, activation confirmation from the vehicle system.
Will automatically send one additional remote start activation, flash & 1 beep following remote start activation (transmitter, button is pressed 2 times within 3 seconds), indicates that the transmitter has received remote start activation.
flash & 2 beeps following remote start activation (transmitter, indicates that the transmitter has received confirmation, successful start of the vehicle system (vehicle now running).
Subaru Models