2004 Nissan 350Z - Enging Cooling System (Section CO) (32 pages)
Download Enging Cooling System (Section CO)
Manual Description
(SRS) AIR BAG” and SEAT BELT PRE-TENSIONER” 2, rEMOVAL OF LIQUID GASKET SEALING 2, wATER INLET AND THERMOSTAT ASSEMBLY 27, wATER OUTLET AND WATER PIPING 29.
SERVICE DATA AND SPECIFICATIONS (SDS) 31, precautions for Supplemental Restraint System (SRS) AIR BAG” SEAT, the Supplemental Restraint System such as AIR BAG” and SEAT BELT PRE-TENSIONER”, used along, with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger certain.
System uses the seat belt switches to determine the front air bag deployment, and may only deploy one front, air bag, depending on the severity of a collision and whether the front occupants belted unbelted, information necessary to service the system safely is included in the SRS and SB section Service Manual, to avoid rendering the SRS inoperative, which could increase the risk of personal injury death.
Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system, do not use electrical test equipment on any circuit related to the SRS unless instructed, before disconnecting the battery, lower both the driver and passenger windows, window slightly raises and lowers automatically to prevent any window to vehicle interference.
Window function will not work with battery disconnected, after removing mounting nuts and bolts, separate mating, surface using seal cutter [SST] and remove old liquid gasket, be careful not to damage mating surfaces.
Tap seal cutter to insert it, and then slide it by tapping, in areas where seal cutter [SST] is difficult use, use plastic, hammer to lightly tap the parts, remove it, if for some unavoidable reason tool such screwdriver.
Used, be careful not to damage mating surfaces, using scraper, remove old liquid gasket adhering liquid, gasket application surface mating surface, q Remove liquid gasket completely from the groove liquid.
Gasket application surface, mounting bolts, bolt holes, wipe the liquid gasket application surface and the mating surface with white gasoline (lighting and heating use) remove, adhering moisture, grease foreign materials, attach liquid gasket tube to tube presser [SST: WS39930000.
Use Genuine RTV Silicone Sealant equivalent, apply liquid gasket without breaks to specified location with, as for the bolt holes, normally apply liquid gasket inside, make sure to read the text service manual.
Q Within five minutes of liquid gasket application, install mating component, q If liquid gasket protrudes, wipe it off immediately, q Do not retighten mounting bolts or nuts after installation, q After minutes or more have passed installation, fill.
If there are specific instructions in manual, observe them, the actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here, adapting radiator cap tester radiator cap, installing radiator upper lower tanks.
Removing radiator upper lower tanks, removing chain tensioner cover water, pressing the tube liquid gasket, o-ring for damage, deterioration improper fitting.
Check if the reservoir tank engine coolant level within, mIN” to MAX” range when engine cool, adjust the engine coolant level necessary, to check for leaks, apply pressure to cooling system with.
Radiator cap tester (commercial service tool) radiator cap, do not remove radiator cap when engine hot, burns could occur high-pressure engine coolant.
Manual Description
(SRS) AIR BAG” and SEAT BELT PRE-TENSIONER” 2, rEMOVAL OF LIQUID GASKET SEALING 2, wATER INLET AND THERMOSTAT ASSEMBLY 27, wATER OUTLET AND WATER PIPING 29.
SERVICE DATA AND SPECIFICATIONS (SDS) 31, precautions for Supplemental Restraint System (SRS) AIR BAG” SEAT, the Supplemental Restraint System such as AIR BAG” and SEAT BELT PRE-TENSIONER”, used along, with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger certain.
System uses the seat belt switches to determine the front air bag deployment, and may only deploy one front, air bag, depending on the severity of a collision and whether the front occupants belted unbelted, information necessary to service the system safely is included in the SRS and SB section Service Manual, to avoid rendering the SRS inoperative, which could increase the risk of personal injury death.
Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system, do not use electrical test equipment on any circuit related to the SRS unless instructed, before disconnecting the battery, lower both the driver and passenger windows, window slightly raises and lowers automatically to prevent any window to vehicle interference.
Window function will not work with battery disconnected, after removing mounting nuts and bolts, separate mating, surface using seal cutter [SST] and remove old liquid gasket, be careful not to damage mating surfaces.
Tap seal cutter to insert it, and then slide it by tapping, in areas where seal cutter [SST] is difficult use, use plastic, hammer to lightly tap the parts, remove it, if for some unavoidable reason tool such screwdriver.
Used, be careful not to damage mating surfaces, using scraper, remove old liquid gasket adhering liquid, gasket application surface mating surface, q Remove liquid gasket completely from the groove liquid.
Gasket application surface, mounting bolts, bolt holes, wipe the liquid gasket application surface and the mating surface with white gasoline (lighting and heating use) remove, adhering moisture, grease foreign materials, attach liquid gasket tube to tube presser [SST: WS39930000.
Use Genuine RTV Silicone Sealant equivalent, apply liquid gasket without breaks to specified location with, as for the bolt holes, normally apply liquid gasket inside, make sure to read the text service manual.
Q Within five minutes of liquid gasket application, install mating component, q If liquid gasket protrudes, wipe it off immediately, q Do not retighten mounting bolts or nuts after installation, q After minutes or more have passed installation, fill.
If there are specific instructions in manual, observe them, the actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here, adapting radiator cap tester radiator cap, installing radiator upper lower tanks.
Removing radiator upper lower tanks, removing chain tensioner cover water, pressing the tube liquid gasket, o-ring for damage, deterioration improper fitting.
Check if the reservoir tank engine coolant level within, mIN” to MAX” range when engine cool, adjust the engine coolant level necessary, to check for leaks, apply pressure to cooling system with.
Radiator cap tester (commercial service tool) radiator cap, do not remove radiator cap when engine hot, burns could occur high-pressure engine coolant.
Nissan Models