Download Smart Start Guide
Manual DescriptionThis easy-to-use SMART START GUIDE provides information some unique, features and functions of your new vehicle, information on features and functions are available your Owner's Manual, his indicator light turns on to remind you that front passenger's front/side.
Airbags and seat belt pretensioner will not deploy during a collision, this is that the sensor has determined that an adult is not sitting in front passenger seat, nOTE: If a smaller adult sits on the front passenger seat, the sensors might detect adult being, a child depending on the person's physique and may deactivate front passenger's front/side.
ADVANCED KEYLESS ENTRY SYSTEM (if equipped), his system allows you to lock and unlock doors without taking, nlock driver's door by, nlock all doors by pushing.
Is located a little right, can sometimes not be detected, ake sure vehicle OFF, take the keyless entry system key.
With you when leaving vehicle, hen locking doors using inside, lock knobs, be careful not, leave the key inside vehicle.
NOTE: Vehicles equipped with the Advanced Keyless Entry System Keyless, entry System both use the same type of keyless entry transmitter, equipped with the Advanced Keyless Entry System allow you to lock unlock, doors with the door request switches (without taking the key out of your purse pocket).
Vehicles equipped with the Keyless Entry System do not have request switches, start the engine by pushing START, sTOP ENGINE button while pushing, clutch pedal (M/T) or brake pedal (A/T).
Engine speed and sound higher (1500, rPM) for less than 1 minute quickly bring, reduce to idle once the temperature achieved, is normal engine operation under cold start conditions.
What this does? This heats up catalytic, converter faster to reduce emissions allows, mazda to use an exhaust header engine, shut the engine OFF by making sure the vehicle park (A/T).
Setting the parking brake, then push START/STOP ENGINE button, activate Accessories (ACC) by pushing START/STOP, eNGINE button once without pushing the clutch brake pedal, turn the ignition to the ON position by pushing START/STOP.
ENGINE button twice without pushing the clutch brake pedal, NOTE: You can drive the vehicle during AWS activation, no need wait, pushing and holding the START/STOP button repeatedly pushing, button while the engine is running will turn the engine OFF.
NOTE: The engine may not start if the key cannot be detected, indicator Light may flash RED or Key not detected” may be displayed key, if the START/STOP ENGINE button indicator light flashes AMBER, could, indicate a problem with the engine starting system.
The engine or switch the ignition to ACC or ON, authorized Mazda Dealer soon possible, for your safety, the Mazda3 is equipped with TPMS that detects low tire, pressure in one or more tires.
One or more tires, the system alerts the driver by turning on light, what to do? Don't ignore the TPMS warning light, tire pressure (when tires are cold) and inflate them proper pressure.