2013 Mazda Mazda 2 - Smart Start Guide (12 pages)

Model: 2013 Mazda Mazda 2
File size: 4.13 MB
Pages: 12 pages



Download Smart Start Guide

Manual Description
The system includes one retractable key fob which remotely locks,  aise lower seat height, push & fold retract key, nOTE: Leaving the key in the ignition or vehicle and pushing the lock switch will lock.

The doors with the key in the vehicle unless a door or the liftgate left open,  open, push liftgate button,  close, push liftgate down until it, securely locks, but do not slam.

Pushed, the liftgate will open slightly, liftgate is not opened within 1, liftgate latch locks (you will hear it lock), the liftgate cannot be opened closed.

Liftgate, push the liftgate opener switch, open, the door/liftgate ajar warning light will be, the liftgate not fully closed, to increase cargo space, fold down one.

Lower the head restraints all, support the seatback with your hand, push the rear seatback knob down, (red indicator is visible when seat.

Secure the rear seat belt, rETURNING SECOND-ROW SEATS TO UPRIGHT POSITION, nOTE: When the liftgate opener switch, ignition ON, vehicle must be Park.

(A/T) or have parking brake set (M/T), verify that the seat belt secured, raise seatbacks until they lock into, position (red indicator not visible.

When seat is locked position), nOTE: Make sure that seat belt routed, in front of seat shown, inside the vehicle make sure they.

Check that all seat belts routed, this indicator light illuminates to remind you that the front passenger's front/side airbags, seat belt pretensioner will not deploy during a collision, in the seat is less than approximately 66 lb.

In the rear seats in appropriate child restraints, this indicator light illuminates if front passenger seat belt is not fastened, manual for important information safety feature, if the lowest scale mark.

Indicates the fuel tank nearly, glossary of Warning indicator lights, nOTE: See Owner's Manual for more details explanations, pressure in one more tires.

Position, rotate the knob to adjust brightness, cancel if speed drops 9 mph, since this vehicle does not use an engine coolant, temperature gauge, red blue engine coolant.

Temperature lights are used indicate high, flashing: Engine is starting run hot, the side of the road and turn engine off, on: Engine coolant is cold no warm air.

Off: Engine coolant is warm warm air, the light may stay on for few minutes after, start-up when the engine cold, but.