2015 Lexus RC F - Dynamic radar cruise control* (86 pages)
Download Dynamic radar cruise control*
Manual Description
Use the cruise control to maintain a set speed without depressing accelerator pedal, press the ON/OFF” button to activate cruise control, cruise control indicator will come on, press the button again deactivate.
And push the lever down set, cruise control SET” indicator will come, lever is released becomes set speed, to change the set speed, operate the lever until the desired set speed obtained.
The set speed will be increased decreased follows, fine adjustment: By approximately 1 mph (1, large adjustment: The set speed can be increased or decreased continually until, canceling and resuming constant speed control.
Pulling the lever toward you cancels, the speed setting also canceled when, pushing the lever up resumes, the vehicle speed is more than approximately 25 mph (40 km/h).
Cruise control can be set when, ● The shift lever is D M, ● Range or higher of D or M has been selected by using paddle shift switch, ● Vehicle speed is above approximately 25 mph (40 km/h).
Accelerating after setting vehicle speed, ● Even without canceling the cruise control, the set speed can be increased by first accelerating the vehicle to the desired speed and then pushing the lever down set new, cruise control is automatically canceled in any following situations, ● Actual vehicle speed falls more than approximately 10 mph (16 km/h) below set.
● Actual vehicle speed is below approximately 25 mph (40 km/h), ● TRAC is activated for period time, if the warning message for the cruise control is shown multi-information display, press the ON/OFF” button once to deactivate the system, and then press button.
If the cruise control speed cannot be set or if the cruise control cancels immediately after, being activated, there may be a malfunction in the cruise control system, to avoid operating the cruise control by mistake, switch the cruise control off using the ON/OFF” button when not use.
Do not use cruise control in any following situations, doing so may result in loss of control and could cause an accident resulting death, ● On roads with sharp bends, ● On slippery roads, such as those covered with rain, ice snow.
Vehicle speed may exceed the set speed when driving down steep hill, without accelerator pedal operation by the driver, vehicle-to-vehicle distance, control mode, the vehicle automatically accelerates and decelerates in accordance to the changes in speed of the preceding vehicle, use the dynamic radar cruise control freeways highways.
● Vehicle-to-vehicle distance control mode (P, ● Constant speed control mode (P, driving in vehicle-to-vehicle distance control mode, this mode employs a radar sensor to detect the presence vehicles up.
Following distance, and operates to maintain a suitable following distance, note that vehicle-to-vehicle distance will close in when traveling long downhill, when there no vehicles ahead, the vehicle travels at the speed set by the driver.
When a preceding vehicle driving slower than set speed appears, when a vehicle is detected running ahead of you, the system automatically decelerates your vehicle, applies the brakes (the stop lights will come on at this time), when the system cannot decelerate sufficiently to prevent your vehicle closing.
When following a preceding vehicle driving slower than set speed, the system continues follow-up cruising while adjusting for changes speed, the vehicle ahead in order to maintain the vehicle-to-vehicle distance set by driver.
Manual Description
Use the cruise control to maintain a set speed without depressing accelerator pedal, press the ON/OFF” button to activate cruise control, cruise control indicator will come on, press the button again deactivate.
And push the lever down set, cruise control SET” indicator will come, lever is released becomes set speed, to change the set speed, operate the lever until the desired set speed obtained.
The set speed will be increased decreased follows, fine adjustment: By approximately 1 mph (1, large adjustment: The set speed can be increased or decreased continually until, canceling and resuming constant speed control.
Pulling the lever toward you cancels, the speed setting also canceled when, pushing the lever up resumes, the vehicle speed is more than approximately 25 mph (40 km/h).
Cruise control can be set when, ● The shift lever is D M, ● Range or higher of D or M has been selected by using paddle shift switch, ● Vehicle speed is above approximately 25 mph (40 km/h).
Accelerating after setting vehicle speed, ● Even without canceling the cruise control, the set speed can be increased by first accelerating the vehicle to the desired speed and then pushing the lever down set new, cruise control is automatically canceled in any following situations, ● Actual vehicle speed falls more than approximately 10 mph (16 km/h) below set.
● Actual vehicle speed is below approximately 25 mph (40 km/h), ● TRAC is activated for period time, if the warning message for the cruise control is shown multi-information display, press the ON/OFF” button once to deactivate the system, and then press button.
If the cruise control speed cannot be set or if the cruise control cancels immediately after, being activated, there may be a malfunction in the cruise control system, to avoid operating the cruise control by mistake, switch the cruise control off using the ON/OFF” button when not use.
Do not use cruise control in any following situations, doing so may result in loss of control and could cause an accident resulting death, ● On roads with sharp bends, ● On slippery roads, such as those covered with rain, ice snow.
Vehicle speed may exceed the set speed when driving down steep hill, without accelerator pedal operation by the driver, vehicle-to-vehicle distance, control mode, the vehicle automatically accelerates and decelerates in accordance to the changes in speed of the preceding vehicle, use the dynamic radar cruise control freeways highways.
● Vehicle-to-vehicle distance control mode (P, ● Constant speed control mode (P, driving in vehicle-to-vehicle distance control mode, this mode employs a radar sensor to detect the presence vehicles up.
Following distance, and operates to maintain a suitable following distance, note that vehicle-to-vehicle distance will close in when traveling long downhill, when there no vehicles ahead, the vehicle travels at the speed set by the driver.
When a preceding vehicle driving slower than set speed appears, when a vehicle is detected running ahead of you, the system automatically decelerates your vehicle, applies the brakes (the stop lights will come on at this time), when the system cannot decelerate sufficiently to prevent your vehicle closing.
When following a preceding vehicle driving slower than set speed, the system continues follow-up cruising while adjusting for changes speed, the vehicle ahead in order to maintain the vehicle-to-vehicle distance set by driver.
Lexus Models