Download Owner's Manual
Manual DescriptionRemove the jack handle and the jack extension bar from the tool box and assemble by following these steps. Replace the grommets for the tire pressure warning valves and transmitters as well. The engine starting system may be malfunctioning due to an electrical problem such as an open circuit or a blown fuse.
Make sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any part other than the intended terminal. Confirm that the fans are operating by checking the fan sound and air flow. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.