Download Owner's Manual
An improperly positioned of the belt across the abdominal design rules shoulder belt can cause serious area must be avoided. Rather, one your seat belts after being in an should be over and the other under, accident as soon as possible. Check to make the belt is too high, it could increase the sure the belt is properly locked and that possibility of your being injured in an the belt is not twisted.
Using only the shoulder portion or lap portion of the belt can result in serious or fatal injuries in the event of a collision or sudden stop. If necessary, disconnect the metal tab (1) from the anchor connector (2) by inserting a key or similar small rigid device into the release button (6) on the anchor connector (2) and allow the webbing to draw back automatically into the retractor. In certain frontal collisions, the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant's body.
The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant's body in certain frontal collisions. If person is lying down in the rear seat or if the shoulder belt still touches their face the front and rear (2nd and/or 3rd row) or neck they need to be returned to a seats are in a reclined position. Bleach, dye, strong careful not to damage the seat belt will slide under the lap belt causing detergents or abrasives should not be webbing or buckle.