2006 Infiniti QX56 - Exhaust System (Section EX) (4 pages)
Download Exhaust System (Section EX)
Manual Description
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here, loosening or tightening heated oxygen sensors, before installing a new heated oxygen sensor, (Use with anti-seize lubricant shown below).
Or equivalent meeting MIL specification MIL-A-907), check exhaust pipes, muffler and mounting for improper attachment, leaks, cracks, damage deterioration, if anything is found, repair replace damaged parts, heated oxygen sensor 2 (bank 2).
Heated oxygen sensor 2 (bank 1), be sure to use genuine exhaust system parts or equivalents which are specially designed heat, perform the operation with the exhaust system fully cooled, remove exhaust system components using power tool.
Installation is in the reverse order removal, always replace exhaust gaskets with new ones when reassembling, before installing a new heated oxygen sensor, clean and lube the exhaust tube threads using Tool, discard any heated oxygen sensor which has been dropped from a height of more than 0.
In) onto a hard surface such as a concrete floor; replace with new one, do not over-torque the heated oxygen sensor, resulting in MIL coming on, if any mounting insulator is badly deformed, repair or replace it.
The mounting insulators, clean inspect them, temporarily tighten the nuts on the exhaust manifold side and the bolts on vehicle side, each part for interference with other components, and then tighten the nuts bolts specification, with the engine running, check exhaust tube joints for gas leakage unusual noises.
Check to ensure that mounting brackets and mounting rubbers are installed properly free undue...
Manual Description
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here, loosening or tightening heated oxygen sensors, before installing a new heated oxygen sensor, (Use with anti-seize lubricant shown below).
Or equivalent meeting MIL specification MIL-A-907), check exhaust pipes, muffler and mounting for improper attachment, leaks, cracks, damage deterioration, if anything is found, repair replace damaged parts, heated oxygen sensor 2 (bank 2).
Heated oxygen sensor 2 (bank 1), be sure to use genuine exhaust system parts or equivalents which are specially designed heat, perform the operation with the exhaust system fully cooled, remove exhaust system components using power tool.
Installation is in the reverse order removal, always replace exhaust gaskets with new ones when reassembling, before installing a new heated oxygen sensor, clean and lube the exhaust tube threads using Tool, discard any heated oxygen sensor which has been dropped from a height of more than 0.
In) onto a hard surface such as a concrete floor; replace with new one, do not over-torque the heated oxygen sensor, resulting in MIL coming on, if any mounting insulator is badly deformed, repair or replace it.
The mounting insulators, clean inspect them, temporarily tighten the nuts on the exhaust manifold side and the bolts on vehicle side, each part for interference with other components, and then tighten the nuts bolts specification, with the engine running, check exhaust tube joints for gas leakage unusual noises.
Check to ensure that mounting brackets and mounting rubbers are installed properly free undue...
Read(view) online free pdf manual 2006 Infiniti QX56
Infiniti Models