2019 Honda Odyssey - Owner's Guide (79 pages)
Download Owner's Guide
Manual Description
Auto park mode: For your convenience, Park (P) is automatically engaged when the vehicle is turned off, or when all of the following conditions are met: the vehicle is stopped with the engine running, the driver’s seat belt is unbuckled, and the driver’s door is opened. You should always apply the brake and shift to Park when idling, or before exiting the vehicle. If you select any gear other than Park when the driver’s door is opened and the driver’s seat belt is unbuckled, Park is re-engaged when the brake pedal is released. Follow the procedure below to use a conveyor-style car wash where you or an attendant do not remain in the vehicle.
Make sure the wiper lever is in the OFF position. You should inform the car wash attendant of this procedure: When the engine is running, apply the brake pedal, select Neutral (N), then release the brake pedal. Press and hold Neutral for two seconds. This puts the vehicle into car wash mode. If the ENGINE START/STOP button is pressed while the vehicle is in car wash mode, the power mode will change to ACCESSORY and a message will be displayed on the driver information interface.
After 15 minutes, the gear position changes to Park and the power mode changes to OFF.
Manual Description
Auto park mode: For your convenience, Park (P) is automatically engaged when the vehicle is turned off, or when all of the following conditions are met: the vehicle is stopped with the engine running, the driver’s seat belt is unbuckled, and the driver’s door is opened. You should always apply the brake and shift to Park when idling, or before exiting the vehicle. If you select any gear other than Park when the driver’s door is opened and the driver’s seat belt is unbuckled, Park is re-engaged when the brake pedal is released. Follow the procedure below to use a conveyor-style car wash where you or an attendant do not remain in the vehicle.
Make sure the wiper lever is in the OFF position. You should inform the car wash attendant of this procedure: When the engine is running, apply the brake pedal, select Neutral (N), then release the brake pedal. Press and hold Neutral for two seconds. This puts the vehicle into car wash mode. If the ENGINE START/STOP button is pressed while the vehicle is in car wash mode, the power mode will change to ACCESSORY and a message will be displayed on the driver information interface.
After 15 minutes, the gear position changes to Park and the power mode changes to OFF.
Honda Models